Power-Pole micro anchor User Manual

4 | MICRO Installation & Owner’s Guide 2018 | www.power-pole.com
A. Qty. (4) 5/16” x 3 1/2” all thread transom
mount bolts
B. Qty. (4) 5/16” fender washers
C. Qty. (4) 5/16” tall brass nuts
D. Qty. (1) butt connector
E. Qty. (1) ring terminal
F. Qty. (3) #8 x 3/4” black flat head screws
G. Qty. (1) 5/16” white thru-hull bushing (optional)
H. Qty. (1) power cord plug
I. Qty. (1) fuse holder with 15 amp fuse
J. Qty. (1) quick release clamp with bolt
K. Qty. (1) adjustment nut
L. Qty. (2) adjustable hex lock
M. Qty. (1) standard key-fob
N. Qty. (1) lanyard for key-fob
O. Qty. (1) wireless dash switch
P. Qty. (1) adhesive strip
Q. Qty. (1) 1/4” Allen key
R. Qty. (1) quick release pull cord for kayaks
S. Qty. (1) cord holder
• 1/2” Wrench or 1/2” Socket with ratchet
• Electric or battery operated drill
• 5/16” & 7/64” drill bit
• Heat gun
• Marine grade sealant
• Fine point marker
• Wire cutters
• Wire strippers
• Wire terminal crimpers
• 1/4” Allen wrench (included)
• Phillips screwdriver
Included Hardware: Installation Tools:
Congratulations on your purchase of the all-electric Power-Pole® MICRO
®
shallow water
anchor. It’s the first of its kind – a super-compact powerhouse that was built to give you the ultimate
shallow water fishing experience.
Please read all installation instructions carefully. The information contained here describes the
proper procedures for safely installing your Power-Pole shallow water anchor.
INSTALLATION
A
B
F
G
K
L
S
R
N
M
O
P
Q
J
I
H
C
D
E

Power-Pole micro anchor Specifications

General

Deployment Depth	8.5 ft
Power Source	12V battery
Control Options	Wireless remote, foot switch, Smartphone app
Mounting	Transom
Deployment Method	Electric
Power Supply	12V DC