Power-Pole micro anchor User Manual

MICRO Installation & Owner’s Guide 2018 | www.power-pole.com | 5
MOUNTING Options
IMPORTANT: In all options it is recommended that the bottom of the MICRO Driver Unit
be mounted above the water line of the boat.
Deck Mount Transom Mount
Place bracket within
3” of edge of
mounting surface Mark and drill holes with
5/16” drill bit and install
hardware as shown.
Q
A
B
C
3”
Place bottom edge of
bracket even or higher than
the boat’s water line
Mark and drill holes with
5/16” drill bit and install
hardware as shown
Q
C
B
A
ADAPTER PLATE
To determine correct adapter plate go to
www.power-pole.com. Additional hardware
may be required.
TRANSOM CLAMP
To order go to www.power-pole.com
or an authorized dealer.
Additional Mounting Options
Available with purchase of accessories.
Adapter Plate
Transom Clamp
Micro
Bracket
Micro
Bracket

Power-Pole micro anchor Specifications

General

Deployment Depth	8.5 ft
Power Source	12V battery
Control Options	Wireless remote, foot switch, Smartphone app
Mounting	Transom
Deployment Method	Electric
Power Supply	12V DC