16 PowerBox-Systems − World Leaders in RC Power Supply Systems
• Initializing
It is essential to carry out this step rst.
First centre your transmitter stick, then select Initialize: now move the stick to
both end-points. The screen displays the movement as a bar, and when the mo-
vement is complete, the small red markers remain in place at the end-points.
• Reversing the output
Um den Ausgang schnell umzupolen ohne jeden einzelnen Punkt einzustellen,
wählen Sie einfach mit der SET-Taste Ausgang umpolen aus.
• Start Matching
Select this menu point if you want to adjust the travel of the selected servo ma
nually using ve points. The PowerBox Mercury SR2 switches to this display:
To Next Page
Loading...
