Close Action
Gravity Timeout
Orientation
Expert Mode
To set how the curtain closes under keyswitch or alarm
Press the middle button to enter menu
Options - Driven or Gravity
Press the Up or Down button to the desired time
Press the middle button to store
Options - Enabled or Disabled
Press the middle button to enter menu
Press the Up or Down button and select either “Driven” or “Gravity”
This time needs to be in excess of the time taken for the curtain to fully close from the open position. Once the time has elapsed
the brake is automatically applied
Press the Up or Down button and select either “Enabled” or “Disabled”
Used to set the correct running direction of the control panel by changing the orientation of the motor
Press the middle button to store
If Expert Mode is Enabled refer to section on Expert Programming
FOR ACTIVATION BY QUALIFIED ENGINEERS ONLY
Press the middle button to store
Press the middle button to enter menu
Press the middle button to enter menu
If the running direction does not match the direction shown on the display
Press the Up or Down buttons to select either “Left” or “Right”
Options - Left or Right
If Gravity is selected a further menu option becomes available and must be set - Gravity Timeout
Press the middle button to store
Advanced Programming of P1000 - Menu Setting
To Next Page
Loading...