Auto Test
Power Save
Last Auto Test
Auto Test Wait
Relay 1 Func
Next Auto Test
Relay 2 Func
Options - Enabled or Disabled
In order to save power this menu automatically turns off the brake once the curtain is in a fully closed position.
Press the middle button to enter the menu
Press the Up or Down button to select either “Enabled” or “Disabled”
Press the middle button to store
This menu sets the Auto Test function of the curtain in line with the British Standard for use in residential properties. If set the
curtain will split drop then close fully before remaining closed for the time set in menu Auto Test Wait. Selecting “Test” will do
an immediate Auto Test.
Failure of an Auto test will be displayed and can be indicated with a status relay.
Options - “Disabled”, “Daily”, “Weekly”, “Fortnightly”, “Monthly” and “Test”
Press the middle button to enter the menu
Press the Up or Down button to select either “Disabled”, “Daily”, “Weekly”, “Fortnightly”, “Monthly” or “Test”
Press the middle button to enter menu
Press the middle button to enter the menu
Options - “Disabled”, “Alarm 1", “Alarm 2", “Open”, “Closed”, “Mains Fail”, “Fault”, “Obstruction” or “Battery Fail”
Press the Up or Down buttons until the desired time is highlighted
Press the middle button to store
This menu sets the time that the curtain remains in the deployed position on a Auto Test
This menu sets how Relay 1 is configured. The relay contacts are volt free c/o and can be used to signal obstruction, alarm
activation, curtain status or fault conditions.
Press the middle button to store
Options - “Disabled”, “Alarm 1", “Alarm 2", “Open”, “Closed”, “Mains Fail”, “Fault”, “Obstruction” or “Battery Fail”
Press the middle button to enter the menu
Press the middle button to store
Press the Up or Down button to select either “Disabled”, “Alarm 1", “Alarm 2", “Open”, “Closed”, “Mains Fail”, “Fault”, “Obstruction” or
“Battery Fail”
This menu sets how Relay 2 is configured. The relay contacts are volt free c/o and can be used to signal obstruction, alarm
activation, curtain status or fault conditions.
This menu displays the date and time of the next Auto Test
Range 0-10mins
This menu displays the date and time of the last Auto Test and whether it Failed or Passed
Press the middle button to store
Press the Up or Down button to select either “Disabled”, “Alarm 1", “Alarm 2", “Open”, “Closed”, “Mains Fail”, “Fault”, “Obstruction” or
“Battery Fail”
Advanced Programming of P1000 - Menu Setting
To Next Page
Loading...