PERIODIC MAINTENANCE CHECK LIST
OPERATOR DATE:
__________
__
MODEL NO.
_______________
S/N
_________
ASSET NO.
_______
_
S - SATISFACTORY; A - ACCEPTABLE, BUT NEEDS ATTENTION U - UNSATISFACTORY - RED TAG
The lock ring, cutter(s}, and arbor locked securely on.
S
A
U
Cutters sharp and free of nicks and flaws.
S U
Guard
in
place and working properly.
S U
Fences properly aligned and square with table.
S U
All safety decals
in
place.
S
U
Working area round machine matted off.
S
A
U
Anti-skid strips on floor area where operator normally stands.
S U
Various types of push blocks and sticks readily available to operator
S U
Kickback path not aimed at other work areas, aisles,
or
doorways.
S
A
U
Wood fence attached tightly to fence shoulders.
S U
No missing parts
or
loose screws
S
A
U
•
Machine stable
in
operation
S
A
U
Foot pedals have proper adjustment.
S U
Belt adjusted to proper tension
S U
Table free of pitch, resin,
or
any foreign material.
S A U
Shaper lubricated where necessary.
S
A
U
Collars and spacers free of nicks, rust, and flaws.
S
A
U
Keyed collar
in
use directly under locking nut on arbor.
S
A
U
Spindle taper socket free of nicks, rust, and flaws.
S
A
U
Shaper properly grounded.
S
A U
Arbor and locking nut thread free of nicks, rust, dings, and flaws.
S
A
U
Fixtures, templates, and clamps
in
good working order.
S
A
U
FORWARD A COPY
OF
THIS FILLED
OUT
FORM
TO
YOUR SUPERVISOR FOR IMMEDIATE ACTION
•
29
To Next Page
Loading...
