powersoft Digam K8 - Temperature, Mains, and Presets; 2.3.14 Temperature Monitoring; 2.3.15 Mains Meters; 2.3.17 Local Preset Management

18
E
2.3.14Temperature
Inthe Temperaturescreenyoucanviewthehistorictemperaturediagramofthelastfourhoursofthefinalcurrentusein
therangefrom10to90°C;inthebottom-rightsideofthescreenthereisthepresentvalue(seefigure2.3.10).
figure2.3.10
2.3.15Mainsmeters
IntheMainsmetersscreenyoucanviewthevoltageandthecurrentofthemains(seefigure2.3.11).
figure2.3.11
E
2.3.16 AmplifierName
Theamplifiername,togetherwiththecurrentpresetname,canbedisplayedbyenablingthe“Displayamplifierdata”
function. The20charactersamplifiername,togetherwiththe40characterspresetnameisshowninandifferentwaywhen
theamplifierisinthestartingpageofthemainmenu. Theamplifiernamecanbeassignedbythe“Editamplifiername”
command(forthetextediting,seeLocalpresethandlingsection).
2.3.17Localpreset
Thereisthepossibilitytostoreupto50presetsonamplifierlocalmemory.
BychoosingtheSavelocalpresetcommand,thecurrentamplifierconfiguration(basicamplifiersettings+KDSP board
settingsifDSP boardispresent)isstoredonthelocalmemory. Toproceed,themenuaskstochooseoneofthe50
availablepresets(seefigure2.3.12),showingthepresetnumberandname.Ifthepresetwasneverused,itisnamed
<empty>.Bypressingok,youcanenterthepresetname. Theselectedcharacterispointedbythearrowshownin
Figure2.3.13,andbypressingor+keysitismodified.Bypressingselkey,nextcharacterisselectedasshowninfigure
2.3.14.Whenthenameinputisfinished,bypressingtheokkey,thepresetisstored
figure2.3.12
figure2.3.13 figure2.3.14
TheRecalllocalpresetcommandloadsandappliesoneofthestoredpresets,choosenthroughanidenticaldialog.Please
notethatallthecurrentamplifiersettingsareoverwritten!
back
Choosepresetname
18SET1
back
-
+
sel
^
back
Choosepresetname
PRESET1
back
-
+
sel
^
back
Selectpreset#1
<empty>
back
<-
->
ok
back
Mainsmeters
170Vrms
20Arms
back
38°C