EasyManua.ls Logo

powersoft Quattrocanali 4804

powersoft Quattrocanali 4804
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INDEX
65
QUATTROCANALI | SERVICE MANUAL
35. Click on “Browse” and select the le
“upgrade4-void.zip” from you PC
36. Select “Upload” from the following screen:
37. The “Uploading & Installing” procedure will take
approx. 10 min.
During running procedure the LEDs condition will change
randomly
After some minute the Front Panel LEDs, POWER ON
and READY must be ON
38. When the procedure is nished you will see the
Upgrading bar totally blue coloured
39. Launch the browser on your PC
40. Connect your PC to the Amp writing 192.254.xxx.xxx
in the address bar of your browser.
The following screen will be shown
Note: Notice the Top-Left Corner “ICON” had changed.
This shows you that you had successfully congured the
Amplier.
If the “ICON” not changed, PLEASE REPEAT Step 35
again.

Other manuals for powersoft Quattrocanali 4804

Related product manuals