To Next PageTo Next Page
Need help?Do you have a question about the powersoft T904 and is the answer not in the manual?
General| Number of channels | 4 |
|---|---|
| Total Harmonic Distortion (THD) | < 0.1% |
| Signal to Noise Ratio | > 100 dB |
| Input Impedance | 20 kOhms |
| Frequency Response | 20 Hz - 20 kHz |
| Power Supply | Switching Power Supply |
| Operating voltage | 100-240 V AC |
| Cooling System | Variable speed fan |
Covers critical operating and safety precautions, including temperature, humidity, altitude, and electrical hazards.
Lists EC directives and harmonized standards the product conforms to, with manufacturer details.
Allows adjustment of amplifier gain levels for each channel or speaker group.
Enables independent muting of individual channels, indicated by amber LED and 'MUTE' text.
Details how to configure the amplifier's network settings, including AUTO IP and STATIC IP.
Displays detailed information about the amplifier's network node and provides access to interface lock and reset functions.
Covers factory default AUTO IP settings and the procedure for configuring a STATIC IP address.
Details the pin assignments for the analog and AES3 balanced audio input connectors (XLR-M).
Details the pin assignments for the analog and AES3 balanced audio link output connectors (XLR-F).
Shows the pinout and color coding for the RJ45 network connectors used for Dante connectivity.
Illustrates the pinout for the NL4 Speakon output connectors for single-ended and bridged configurations.
