20
OPERATION:
3. Battery type
Supported Battery Types
Lead-acid battery
Sealed(default)
Gel
Flooded
User
Lithium battery
LiFePO4(4S/12V;8S/24V;16S/48V)
Li(NiCoMn)O2 (3S/12V;6S/24V;12S/48V)
User
Setting the battery type via the LCD
① Sealed
(Default)
② Gel ③ Flooded ④ User (Apply to
“MT50” and “PC
software “Solar
Station Monitor”)
Operation:
On the battery voltage interface, long press the “ENTER” button until the
battery type interface flashes. Then press the “SELECT” button to change the
battery type, and press the “ENTER” button to confirm.
CAUTION
The controller can only set the lead-acid battery type. The lithium
battery type needs to be set through the PC software or APP.
To Next Page
Loading...
Need help?
General
