PowerTech PW220 - PKS-1 Key Selector; PPB-1 Push Button; Flashing Light; Radio Transmitter

INSTRUCTIONS PW220/PW230 5
1.3.4 PKS-1 Key Selector
Table 3: List of small parts for PKS-1 Quantity
3*20 Screw 3pcs
Nylon screw anchor 3pcs
Key 2pcs
1.3.5 PPB-1 Push Button
Table 4: List of small parts for PPB-1 Quantity
3*20 Screw 3pcs
Nylon screw anchor 3pcs
1.3.6 PF-1 Flashing Light
Table 5: List of small parts for PF-1 Quantity
3*20 Screw 3pcs
Nylon screw anchor 3pcs
1.3.7 PR-1 Radio Transmitter
Figure 6
Figure 7
Figure 8
Figure 9
PR-1 radio transmitter is used for the remote control of the gate
movement.
To use the transmitter, press and hold the button for 1 second.
There are two buttons on the transmitter for operating dual-gate (A)
or single-gate (B) opening and closing.
PF-1 flashing light is controlled by PC160 control box and blinks
when the gate is moving. The flashing light stops blinking when the
gates finish opening or closing.
The PPB-1 push button is used for opening the gate indoors
without the radio transmitter.
The PKS-1 key selector is used for opening the gate outdoors
without the radio transmitter. PKS-1 key selector is supplied
with two keys