powertronics PQR D52 - Data Log via Serial Command; Requesting Data Log; Data Log Format and Explanation

PQR Series Model D52
Page 32
www.Powertronics.com
V2.1
C4 - Transmit a Data Log of input channels:
Transmit or type: C4
The PQR D52 will respond by transmitting the Listing of the voltages measured on all input
channels each minute since the unit was put on-line, and the RAM was cleared:
The first line of the transmission has a header listing the Time and Date that the data logging was
started. The following lines of the file are the voltage sample of the average voltage tested once
each minute. The first character indicates if the reading was a minute or hourly reading.
Typing or Transmitting the Escape character at any time will terminate the transmission of this
report.