powertronics PQR D52 - Modem Hang-Up Command; Disconnecting Modem Signal

PQR Series Model D52
Page 40
www.Powertronics.com
V2.1
CX - Hang up the phone:
This Command allows the operator to disconnect the signal from a phone line on a Modem
attached to the PQR D50/52.
Transmit or type: CX
The PQR D50/52 will respond by transmitting the following:
Having sent this message, the unit then sends the hang-up command to the modem. If there is
a modem connected, and it had the phone off-hook, it would put the phone on-hook.
Thank you, and good bye.