PQR
Series Model D52
Page 57
www.Powertronics.com
V2.1
Probe 100 Monitor
Tool Box size monitor measures common-mode noise, spikes, high frequency noise, surges,
sags, power failures, and power dropouts
Determines if the outlet is wired properly
Detects power problems quickly and economically
The PROBE continuously monitors the line for high or low AC line voltage conditions.
Simple to operate
Plug it in, and press the Reset button
Periodically check the LEDs
The Probe stores events until reset by operator !
The Probe is useful in
identifying types of power
disturbances that are on the line. It is
like a snapshot of specific power
problems. If you are having a
problem with a computer system or
peripheral, the Probe can be plugged
into the same circuit and left for a
period of time. When a problem is
experienced with the equipment,
immediate checking of the Probe’s
LEDs will indicate the worst case
power problem. If none of the LEDs
are illuminated then the problem may
be with the hardware. The LEDs that
are illuminated indicate the types of
disturbances that may be affecting
the equipment. The LEDs on the
Probe “latch” in the ON position
when the device receives a
disturbance.
To Previous Page