Powervar E240-22-A - Introduction to POWERVAR Sinergy III UPS; Technical Support Contact Information; FCC Compliance Statement; General Safety Precautions

A01-00027 Rev. A
Table of Contents
1. Introductio…………………………………………………………………………………………
1-1. Technical Support …………………………………………………………………………………….. ..
1-2. FCC Compliance ……………………………………………………………………………………….
1-3. Safety …………………………………………………………………………………………………. ..
1-3-1. Safety Intended Use …………………………………………………………………………………..
1-3-2. Safety Notices……………………………………………………………………………………. …..
1-4. Emergency ………………………………………………………………………………………………
1-5. Leakage Currents …………………………………………………………………………………. …...
1-6. Radio Interference ……………………………………………………………………………………...
1-7. Batteries ………………………………………………………………………………………………..
1-8. Repackaging ……………………………………………………………………………………………
1-9. About the Operating Instructions ……………………………………………………………….………
1-10. Device Overview ……………………………………………………………………………………...
1-11. Symbols ………………………………………………………………………………………………..
1-12. Documentation Structure ……………………………………………………………………………...
1-13. Preparation for Use …………………………………………………………………………………. ..
1-13-1. Delivery……………………………………………………………………………………………...
1-13-2. Storage ……………………………………………………………………………………………...
1-14. Unpacking and Inspection …………………………………………………………………………….
1-15. Handling ……………………………………………………………………………………………….
1-16. Environmental Conditions …………………………………………………………………………….
1-17. Access to Area ………………………………………………………………………………………...
1-18. Rack Loading ………………………………………………………………………………………. ...
1
1
1
1
1
2
3
3
3
3
4
4
4
5
5
5
5
5
5
6
6
6
6
2. Rack/Tower Installation………………………………………………………………………………. ..
2-1. Tower Installation……………………………………………………………………………………….
2-2. Rack Installation ………………………………………………………………………………………..
2-2-1. Attaching the mounting ears………………………………………………………………………….
2-2-2. Mechanical Fixing of 19 inch Units ………………………………………………………………….
2-2-3. Assembly Steps ……………………………………………………………………………… ……...
2.3. Electrical Preparations for UPS Installation…………………………………………………………….
2.3.1. External Protection and Isolating Devices …………………………………………………………..
2.3.2. Installation Data ……. ………………………………………………………………………………..
2.3.3. Cable sizes and Current………………………………………………………………………………..
2.3.4. Connection Warnings …………………………………………………………………………………
2.4 Connecting Mains and Load Cables……………………………………………………………….…….
2.4.1 Prepare input and output cables ……………………………………………………………………. …
2.4.2 Connect the input and output cables to the terminal block …………………………………………….
7
7
8
8
8
9
11
11
11
12
12
14
14
14
3. Operations ………………………………………………………………………………………………...
3-1. Operating Mode / Status Description…………………………………………………………… …….
3-2. Button Operation ……………………………………………………………………………………….
3-3. LED Indicators ………………………………………………………………………………………….
3-4. Audible Alarm ………………………………………………………………………………………….
3-5. Single UPS Operation ………………………………………………………………………………….
3-5-1. Turn on the UPS with utility power supply (to Line mode) …………………………………………
3-5-2. Turn on the UPS without utility power supply ( to battery mode) …………………………………..
3-5-3. Connect devices to the UPS…………………………………………………………………………..
16
16
17
18
18
18
18
19
19