When PowerSeeker is connected, it is used to enable/disable topography mapping.
When it is enabled, a bathymetric map will be drawn on the map screen.
1. Topography mapping switch
: disabled.
2. Switch for locking the map orientation
: enabled.
: The map orientation is locked and the map screen won't rotate.
: The map orientation is not locked and the map screen will rotate based on
the direction you face.
27
: Determines the current location of the device and you.
4. Positioning
: Touch the button and the introduction to adding interest points will be
displayed. You can press and hold the map screen to add interest points.
5. Add interest points
: Touch the button and the interest points and fishing points you add to
favorites will be displayed.
6. Favorites list
3. Switch between map layers
: Touch it to switch between the street mode and the satellite mode.
: Indicates the location of the return point.
7. Return point
To Next Page
Loading...
