User Manual
POW-M80 & POW-M100 Series
8
2 Installation and Wiring
2.1 Unpacking and Inspection
Before unpacking, inspect the packaging for any signs of damage. After unpacking, check the
contents to ensure nothing is damaged or missing. Inside the package, you will find the following
items:
⚫ Controller
⚫ User Manual
⚫ Installation screws
⚫ Parallel connector
⚫ External temperature sensor
2.2 Choosing the Installation Location
Before installation, several aspects should be considered to determine or provide a suitable and
safe installation location:
Install the controller in a space with good natural ventilation/exhaust.
Ensure there is ample clearance around the controller. The minimum
clearance at the top, bottom, and both sides of the controller is 75mm.
Install the controller on a non-combustible wall and ensure there are no
flammable materials nearby; an increase in temperature during controller
operation is a normal occurrence.
Install the controller on a non-combustible wall and ensure there are no
flammable materials nearby; an increase in temperature during controller
operation is a normal occurrence.
Install the controller on a non-combustible wall and ensure there are no
flammable materials nearby; an increase in temperature during controller
operation is a normal occurrence.
When running multiple controllers in parallel, ensure they are installed at the
same horizontal height, with a minimum spacing of 200mm between
controllers.
To Next Page
Loading...
Need help?
General
