User Manual
POW-M80 & POW-M100 Series
1
Important Safety Instructions
WARNING: Carefully read and adhere to all safety instructions.
➢ Before installing and operating the controller, please read the user manual thoroughly and keep
it for future reference.
➢ The installation or operation of the controller should only be performed by individuals who
have received proper training and supervision.
a. Anyone lacking the necessary knowledge, experience, or capabilities for the safe installation
and operation requirements.
b. Individuals (including children) who may have physical, sensory, or intellectual impairments
that could affect the safe installation and operation.
a. This controller product does not have user-serviceable components; do not disassemble or
attempt to repair the controller yourself.
b. Install the controller in a well-ventilated environment with adequate clearance around it.
c. Install the controller on non-combustible walls and ensure there are no flammable materials
nearby; it is normal for the controller to generate heat during operation.
d. Place the controller in an environment that is protected from direct sunlight, rain, humidity,
and dust, and keep it away from any flammable liquids or gases. The controller is for indoor
use only.
e. Do not install or operate the controller on top of, directly above, or in an enclosed space above
batteries, as batteries emit explosive gases.
f. Do not place any objects on top of the controller.
a. Install and charge batteries in well-ventilated or exhaust-ventilated environments.
b. Ensure there are no open flames in the vicinity of the batteries, as batteries emit explosive
gases.
c. Battery acid is corrosive; if battery acid comes into contact with the skin, rinse immediately
with clean water.
To Next Page
Loading...
Need help?
General
