User Manual
POW-M80 & POW-M100 Series
6
c. Reversed photovoltaic polarity
d. Overvoltage protection for batteries
e. Overdischarge protection for batteries
f. Over-temperature protection
⚫ External Temperature Probe Configuration
Enhance precision in battery temperature monitoring by configuring an external temperature
probe. This ensures accurate temperature compensation for optimal system performance.
⚫ Forced Air Cooling
Built-in cooling fan for forced heat dissipation, improving overall device operational efficiency.
⚫ Lithium Battery Activation
Compatible with lithium batteries. When the battery type parameter is set to lithium batteries, the
charging cycle will be adjusted to accommodate the needs of lithium battery charging. Additionally,
when connected lithium batteries are in a protected state, the controller will activate the lithium
batteries with the energy from the solar panels, with current not exceeding the lithium battery
protection voltage and current range.
Warning: Do not charge lithium batteries when the temperature is below 0°C.
To Next Page
Loading...
Need help?
General
