Need help?Do you have a question about the PR electronics 9106 and is the answer not in the manual?
Describes temperature transmitter and sensor capabilities for signal integrity.
Details intrinsically safe isolation barriers with SIL 2 for safety and cost-effectiveness.
Covers communication interfaces for accessing PR products, supporting Modbus and Bluetooth.
Highlights single devices designed for multiple applications, simplifying installation and training.
Focuses on compact, high-quality isolators with microprocessor technology and EMC immunity.
Explains flexible and stable display devices for process signal readout with universal input.
Explains the meaning of symbols used in the manual for device safety and compliance.
Provides essential safety guidelines for handling, operation, and environmental considerations.
Details the procedures for qualified personnel to safely mount the device.
Outlines the steps for calibrating and adjusting the device's measurement and connection.
Provides step-by-step instructions for safely removing the device from its mounting.
Describes the 9106's function as a 1- or 2-channel isolated repeater barrier.
Highlights features like detachable displays, LEDs, and tag number definition for operational status.
Lists key technical specifications including isolation, response time, and accuracy.
Diagram illustrating input signal connections for channel 1 and 2.
Diagram showing output signal connections for channel 1 and 2.
Diagram detailing the power supply and device status connections.
Diagram illustrating input signal connections for channel 1 and 2 in hazardous areas.
Diagram showing output signal connections for channel 1 and 2 in hazardous areas.
Diagram detailing power supply and device status for hazardous area installation.
Explains the simple menu structure and help texts for easy product use and configuration.
Details the 4-line LCD display and password protection feature.
Provides instructions for attaching and detaching the PR 45xx accessory.
Details product types, barrier versions, unit channels, and associated approvals.
Covers environmental, mechanical, and common electrical specifications.
Specifies isolation values, signal dynamics, and response times.
Presents accuracy figures for different input types and temperature coefficients.
Details measurement range, transmitter supply, and sensor error detection.
Provides specific parameters for Ex barrier variants like Uo, Io, and Po.
Specifies signal range, load stability, and current limit for the output.
Lists authority requirements, certifications, and safety integrity level information.
Explains how to interpret error codes displayed on the 45xx unit for troubleshooting.
Lists potential causes for hardware and software errors encountered by the device.
Illustrates connections for the power rail and supply terminals.
Shows wiring for SIL 2 input configurations, including 2-wire transmitters.
Diagrams for current and passive 2-wire output connections.
Illustrates the internal connections between the CPU, FLASH, and terminals.
Details LED status and relay output behavior for various error conditions.
Guides through parameter setup using function keys and help texts.
Covers display setup, password protection, language selection, and power rail settings.
Explains setting low and high limits for loop error detection and status relay.
Illustrates the device's state after power-up and navigation through parameters.
Maps out the configuration flow for display, password, language, and rail settings.
Lists help text references for various parameters, settings, and error types.
Details IECEx markings and applicable standards for installation.
Provides specific installation guidelines for IECEx hazardous locations.
Covers ATEX markings, certificates, and applicable standards for installation.
Provides specific installation guidelines for ATEX hazardous locations.
Provides installation guidelines for FM certification in hazardous locations.
Covers UL markings, certificates, and applicable standards for installation.
Provides specific installation guidelines for UL hazardous locations.
General| SIL classification | SIL 2 |
|---|---|
| Operating Temperature | -20 to +60°C |
| Mounting | DIN rail |
| Input | RTD, potentiometer |
| Enclosure | Plastic |
To Next Page