PR electronics PRetop 5335 - Declaration of Conformity; Safety Instructions

DECLARATION OF CONFORMITY
As manufacturer
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
hererby declares that the following product:
Type: 5335
Name: 2-Wire transmitter with HART
®
protocol
is in conformity with the following directives and standards:
EMC directive 89/336/EEC and later amendments
From serial no.: 990904001 ff
EN 61 326
EN 50 081-1, EN 50 081-2
EN 50 082-1, EN 50 082-2
This declaration is issued in compliance with article 10, subclause 1 of the EMC
directive. For specification of the acceptable EMC performance level, refer to
the electrical specifications for the module.
The ATEX directive 94/9/EC and later amendments
From serial no.: 990904001 ff
EN 50 014 and EN 50 020
Ex certificate: 99 ATEX 126965
Notified body for CENELEC/ATEX: UL International Demko A/S 0539
Rønde, 4 Jan. 2000 Peter Rasmussen
Manufacturer’s signature
17
Safety instructions
• Ex installation:
For a safe installation of 5335B in hazardous area the following must be
ob served. The module must only be installed by qualified personnel who are
familiar with the national and international laws, directives and standards that
apply to this area.
16