27
Programming:
PRetop 5335 can be configured in the following 3 ways:
1 With PR electronics A/S’ communications interface Loop Link 5905A and
PReset PC configuration software.
2. With a HART
®
modem and PReset PC configuration software.
3. With a HART
®
communicator with PR electronics A/S’ DDL driver.
1: Loop Link 5905A:
For programming please refer to the drawing below and the help functions in
PReset.
Loop Link 5905A is not approved for communication with modules installed in
hazardous (Ex) areas.
26
To Next Page
Loading...
