10/20
For the replacement of color wheels, it can be directly taken off by hands with due care. New color filters must be tightly
glued in right direction to the color wheel..
Gobo Replacement: Gobo wheel is taken off in the same direction as color wheel after it is taken off by hand. After the
new gobos are tightly inserted into the gobo wheel in the right direction and fixed gobo wheels installed, then the color
wheel should be re-installed.
Note: Color filter must not be touched by hands, it should be touched with glabrous, clean and soft tissue or cloth matted
between hand and glass instead of with bare hand.
Close the rear cover and fasten 4 screws and unlock tilt.
To Next Page
Loading...
