PRD 700
Regulate VSS preset.
1. Press the setting key, tool icon.
2. Go to option 12.
3. Press the box with the listed number and the number keypad will pop up.
4. The line on the bottom of screen is about speed.
Every line on the top of the screen is about the operation rate.
Every speed level corresponds to one operation rate.
Both lines are determined by you.
Press the number you would like to change and the number keypad will pop
up.
5. Confirm your choice, press OK.
6. SAVE your choice.
Go to next/previous setting, use arrow buttons.
Press EXIT to return to home screen.
Prd.com.gr - PRD 700 Manual page 19
To Next Page
Loading...