PRD 700 - User Manual

PRD 700
PRD 700 Boost controller w/ Can Bus interface
Technical Details
 Voltage: 8-18 V DC
 Operating Temperature: -10 to +60 C
 Dimensions: w 81mm, h 49mm, d 12mm
 Aluminum construction
 Display.2.4″ TFT Intelligent LCD Touch Display in aluminum framing
 4Bar MAP sensor
 Solenoid valve
 Weight: 62 g
Features
 7 control modes (Off-Low-High-RPM1-RPM2-VSS-GEAR)
 Boost by RPM (configurable 2D Map)
 Boost by VSS (configurable 2D Map)
 Boost per GEAR
 Can-Bus integration (Timing Advance, TPS, CWT, IAT etc)
 Configurable shift light
 Exhaust Gas Temperature (K-Type)
 Failsafe settings (boost cut & warning for AFR , Boost or EGT limits)
 Failsafe setting (boost cut &warning for WMI)
 RPM Duty Add (4Dmap)
 DTC Fault clearing
 (Under Dev.) Programmable Aux failsafe input to limit boost under conditions (for example when
nitrous switch is activated or when there is no voltage from methanol controller etc.)
 (Under Dev.) Logging using our purpose-built Windows application to monitor & plot real time
values like Actual duty cycle, spark advance, boost pressure etc
 (Under Dev.) VAG Group can bus mode (i.e. Timing retardation per cylinder etc)
Prd.com.gr - PRD 700 Manual page 1

Summary

Technical Details

Key Features

Safety and Warnings

Mode Configuration

RPM Preset Configuration

Gear Preset Configuration

Installation and Wiring

Wiring Pinout Description

Detailed description of each pin in the 24-pin connector for installation.

Hardware Connection Details

Information on physical connections for the device and its components.

Internal Wastegate Hookup Guide

Instructions for connecting internal wastegates to the boost controller.

External Wastegate Hookup Guide

Instructions for connecting external wastegates to the boost controller.

PRD 700 Specifications

General

Brand	PRD
Model	700
Category	Controller
Language	English