PRD 700
Regulate WMI preset
1. Press the setting key, tool icon.
2. Go to option 32.
3. Press the box with the listed number and the number keypad will pop up.
4. The number line at the bottom of the screen is about speed multiplied 100 times.
5. Confirm your choice, press OK.
The line on the top of the screen is about the duty cycle. Every rate corresponds to
one duty cycle rate.
Both lines are determined by you.
Press the number you would like to change and the number keypad will pop up.
6. Confirm your choice, press OK.
7. SAVE your choice.
WARNING! duty cycle must not be under 50%
• Go to next/previous setting, use arrow buttons.
• Press EXIT to return to home screen.
33. CHEAT BOOST
Prd.com.gr - PRD 700 Manual page 39
To Next Page
Loading...