PRD 700
3 5. Restore to default settings....................................................................................................41
Installation Instructions......................................................................................................42-43-44-45
Wiring Plan.................................................................................................................42-43
Connections...............................................................................................................................44-45
Important Information
Please read the following manual carefully. Proceed to the installation process IF and
ONLY you completely understand notifications titled as “Important”, “Warning”,
“Attention”.
Important
This product must be installed ONLY while the engine is off.
This product is ONLY for vehicles with 12V battery system.
Prior to installation, all necessary safety measures such as removal of the
negative terminal should be taken.
Warning
1. Installation and regulation of this product must be done only by a trained
expert, if not it may damage the unit and the vehicle.
2. While installing the product to the vehicle, make sure that the unit does not
interfere with the driver’s view and the smooth vehicle operation.
3. Before soldering and using other tools of installation, make sure that you read
and understood their manuals. Wrong use may cause injuries.
4. When working on electrical wires, make sure you have disconnected the
negative terminal side of the battery.
5. Pay attention while the boost increases. High boost could damage the engine.
6. Before the installation, make sure you know the safe boost pressure limit of the
vehicle each time.
7. Manufacturer and Seller are not responsible for any damage caused by
exceeding the safe boost pressure limit.
8. Never setup prd 700 while vehicle is on the move.
Prd.com.gr - PRD 700 Manual page 3
To Next Page
Loading...