PRD 700
16. Rpm duty add
Regulate RPM duty add.
1.Press the setting key, tool icon.
2. Go to option 16.
3. Press the box with the listed number and 2 number lines will appear on the
screen.
4. The line on the bottom of screen is about speed.
Press the box with the listed number and the number keypad will pop up.
5. Confirm your choice, press OK.
The line on the top of the screen is about the duty cycle. Every rate corresponds to
one duty cycle rate.
Both lines are determined by you.
Press the number you would like to change and the number keypad will pop up.
6. Confirm your choice, press OK.
7. SAVE your choice.
Go to next/previous setting, use arrow buttons.
Press EXIT to return to home screen.
Prd.com.gr - PRD 700 Manual page 23
To Next Page
Loading...