PRD 700
13. GEAR preset
Regulate GEAR.
1. Press the setting key, tool icon.
2. Go to option 13.
3. Press the box with the listed number and 2 number lines will appear on
the screen.
The line on the bottom of screen is about speed.
Every line on the top of the screen is about the operation rate.
Every speed level corresponds to one operation rate.
Both lines are determined by you.
7. Confirm your choice, pressOK.
8. SAVE your choice.
Prd.com.gr - PRD 700 Manual page 20
To Next Page
Loading...