PRD 700
The mode you choose will be seen on MODE box, back to home screen.
If you have chosen your boost controller to work based on LOW set mode, “LOW” will
be written on home screen MODE box.
Pressing that “LOW” you switch it to “HIGH” and opposite.
If you have chosen your boost controller to work based on RPM1, “RPM1” will be written
on home screen MODE box.
Presssing that “RPM1” you switch it to “RPM2” and opposite.
If you have chosen your boost controller to work based on VSS, “VSS” will be written on
home screen MODE box.
If you have chosen your boost controller to work based on GEAR, “GEAR” will be
written on home screen MODE box.
4. Confirm your choice, press OK.
5. SAVE your choice.
Go to next/previous setting, use arrow buttons.
Press EXIT to return to home screen.
Prd.com.gr - PRD 700 Manual page 7
To Next Page
Loading...