6 Working with the applications ■
33
6 Working with the applications
This chapter explains which applications the balance has and how
these are operated (see also chapter 4.5 “Activating the two main
menus” and chapter 4.6 “How the menu control operates”).
If «PRINT» is operated in an application, a report corresponding to the
application is printed out.
6.1 Structure of the application menu
To activate the menu see chapter 4.5 “Activating the two main
menus” and chapter 4.6 “How the menu control operates”.
The applications of the balance are called up using the application
menu and adapted to the user's needs:
Printing conventions:
• The settings for the sub-menus programmed in works are printed in
bold in these operating instructions
• For a greater clarity, only that part of the menu tree which
corresponds to this application is shown with each application
description.
• You will find the complete menu tree for the application menu in
chapter 16 “Application menu tree”.
• Explanations of the menu functions are printed in italics.
Main path Definable functions
OFF APP Select application program
SETUP Specify parameters for the selected application
A-StArt OFF The selected application can, if required, be
loaded automatically every time the balance is
switched on
To Next Page