6 Working with the applications ■
39
6.8 Application «Summation»
There is no Setup menu for this application.
With the aid of the „SUM“ application you can add individual weigh-
ings, without the balance being tared to zero before each individual
weighing.
Functions of the application:
Operation:
Start the application (see chapter 6.3 “Changing application / weigh-
ing mode”).
• Place something on the weighing pan.
•Press the «REF»-button until the desired function appears on the
display.
• Release the «REF»-button.
«Sto n»: - Take stable value and add to the sum of the
components.
- Short confirmation with display „StorEd n“.
«rESEt»: - Reset
«InFo»: - Display of:
- Total weight „TOT“
- Individual components „n“
- Exit info with «MODE»-button.
To Next Page