Precisa BJ Series - Activation of Password Protection

■ 10 Practical examples
54
10.1.2 Activation of password protection
The possibilities for setting the password protection are described in
chapter 5.9 “Password protection”.
In order to activate password protection, proceed as follows:
- - - - PWD • Press «MODE» and hold down button until
„- - - - PWD“ appears.
• Release the «MODE»-button.
7000 PWD • Press «MODE» briefly. The first digit of the
password will flash.
• Enter the first digit by briefly pressing
«MODE» repeatedly.
7900 PWD • Press «MODE» until the second digit flashes.
• Enter the second digit by briefly pressing
«MODE» repeatedly.
7914 PWD • In the same way enter the third and fourth
digit of the password.
• Hold down «MODE» until input is complete (no
digit flashing).
ProtEct OFF • Press «MODE» briefly. „ProtEct ...“ will
appear.
•Press «MODE» repeatedly, until the desired
data-protection is displayed (the setting will
flash).
7914 NEW • Press «MODE» and hold down button until
„7914 NEW“ appears.
• Release the «MODE»-button.
7914 NEW • Your own new password can now be entered
in a similar manner to the foregoing.
- - - - PWD • Press «PRINT» to return to
„- - - - PWD“.
•Press «PRINT» to exit menu.