TECHNICAL FEATURES
3
Atom amplifiers adopt the optimum class d performance, reliability, and footprint of the
original Atom and ion platforms. At first glance, you’ll notice several key improvements.
Atom’s signal inputs, power/ground, and speaker connections are all relocated to the
leading edge of the chassis, for an easier, more appealing install. All pre-amp &
crossover options are conveniently located on the back side. What you might not notice
are additions to the circuit board, including increased power supply & output stage
components, & monoblock bridging capability. Installation of Atom amplifiers is unique,
using mounting pedestal at each corner. The pedestals elevate the heatsink, improving
airflow around and under the chassis. Additionally, rubber grommets under and inside
each pedestal electrically isolate the amplifier chassis from the vehicle chassis, reducing
the potential for ground loop noise.
To Next Page
Loading...
