12
Introduction
Your new dispenser has a rinse & semi automatic fill feature. To rinse a new clean bottle, you
simply turn the bottle upside down & press the rinse button (ozone rinse). Push and hold
button, now the bottle is rinsed and ready for a fill. Turn 5&3 Gallon on bottom grate to fill. 5
gallon bottle is preset to shut off once it is filled, for the 3 gallon there is a bottle stop button
has to be pushed.
For smaller bottles the bottle shelf should be lowered to reduce the distance between the
water outlet spout and the neck opening on the bottle. To lower the shelf, simply pull ahead
on the shelf and lower it onto the shelf stopper as shown above. When your have completed
To Next Page
Loading...
General