Precision 0002 Series User Manual

14
Initial Setting:
Range T1 & T2: Rotate small slotted screw (located beside T1 & T2) either
direction until window about shows ‘1M’ AND large dial shows ‘0-3’
Mode: Rotate small slotted screw either direction until ‘E’ shows in window
above.
Setting Bottle Fill Time: Adjust BOTH black knobs to the same setting
number. See above picture.
Semi Automatic Dispenser Timer Instructions

Precision 0002 Series Specifications

General

Brand	Precision
Model	0002 Series
Category	Dispenser
Language	English