8
Water Dispenser Unpacking Diagram
Your water dispenser has been shipped in a strapped, 2-sleeve, box. Unpack the
water dispenser by:
1. Remove the straps off the cardboard box.
2. Lift the top cardboard sleeve off of the dispenser.
3. Tip the dispenser slightly and pull out the half flaps.
4. Tip the other 3 directions to pull out the other 3 flaps.
5. Return the dispenser to the upright position with all 4 flaps outward.
6. Lift the remaining cardboard sleeve over the top of the dispenser.
To Next Page
Loading...