EasyManua.ls Logo

Precor 9.23 - Treadmill Safety Features; Using the Safety Clip; Handrails and Power Switch

Precor 9.23
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Owner’s Manual: Treadmill Safety Features 11
Treadmill Safety Features
The treadmill is equipped with certain items that, when
used properly, help sustain an enjoyable workout. These
items include:
Safety clip and magnetic safety key
•Handrails
•Power switch
Important: Before exercising, review the Important Safety
Instructions found at the beginning of this manual.
Using the Safety Clip
Attach the safety clip to your clothing before each workout.
Refer to Figure 4. A tug on the lanyard disengages the
magnetic safety key and trips the safety power switch
inside the display console that stops the running belt and
ends your exercise session.
Note: If the safety power switch trips, the treadmill does
not retain your workout statistics.
To resume exercising, take the following steps:
1. If needed, reattach the safety clip to your clothing and
the magnetic safety key onto the display console.
2. Straddle the running belt.
3. Press QUICKSTART or select a program.
4. Hold onto a handrail while you step on to the running
belt with the speed at or below 1 mph (1.6 kph).
Figure 4: Attach the safety clip to your clothing
Important: To prevent unauthorized use, remove the
magnetic safety key and safety clip after your workout and
store it in a safe place. The treadmill cannot operate
unless the magnetic safety key is attached to the display
console.

Table of Contents

Other manuals for Precor 9.23

Related product manuals