Precor 9.45i - Page 11

9.45, 9.45i Treadmill
Page 11
4. There are five error code log positions. The error code log is displayed and scrolls across
the left display window (see Diagram 2.4). Use the SPEED
▼ (or INCLINE ▼) and SPEED ▲
(or INCLINE
▲) keys to scroll through the error code log. The most recent error condition will
be displayed in position 1 and the oldest error will be displayed in position 5. When an error
is added to a full log the new error will be inserted in position 1 and all other logs will be
pushed down one position. The error that was in position 5 will be lost.
5. Once you have completed the diagnosis and repair of the treadmill, it is generally desirable
to clear the error code log. Then any subsequent error that are logged will be known to be
new error conditions. To clear the error code log, press the QUICK START and STOP keys
simultaneously. Or, press ENTER to retain the current error information and return to the
User ID prompt.
Diagram 2.4 - Error Code Log
6. The example above (Diagram 2.4) shows an “Error 22” in position 1 and “No Error” in
position 2.
Err:
No
Err
2
22
1