Precor 9.45i - Procedure 2.5 - Displaying the Treadmill Odometer and Error Code Log

9.45, 9.45i Treadmill
Page 10
Procedure 2.5 - Displaying the Treadmill Odometer and Error
Code Log
Procedure
1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2. On 9.45 (1L or 2P units), with the PRECOR M9.45 banner scrolling, press the ENTER,
SPEED
▼ and SPEED ▲ keys, simultaneously. Continue to hold the keys until the message
TREADMILL ODOMETER scrolls across the left display window. On 9.45 (3Y units), press
keys RESET,6,5, sequentially.
Note:
The right display window displays total miles or kilometers on the treadmill (see Diagram 2.3).
The top display window shows the most significant bits of the number; the lower display window
shows the least significant bits of the number. The number displayed is 102,187,723 (in miles or
kilometers).
Diagram 2.3 - Odometer Reading For the Treadmill
3. Press ENTER to access the error code log.
000
1
021
8
7
72
3