9.45, 9.45i Treadmill
Page 24
Procedure 5.2 - Troubleshooting the Heart Rate System
If the HEART RATE indicator does not blink with your heart beat when you perform Procedure
2.1, the problem may be either the heart rate receiver assembly or the chest strap assembly.
This troubleshooting procedure gives you the information you need to determine which of these
components is malfunctioning.
Procedure
1. If you are referring to this procedure because the HEART RATE indicator did not blink
properly when you performed Procedure 2.1, step 10...
THEN... OTHERWISE...
Skip to Step 7. Continue with the next step.
2. Check the mounting orientation of the Polar heart rate receiver. It must be mounted and
oriented as shown in diagram 5.2.
Diagram 5.2 - Polar Heart Rate Receiver Orientation
Receiver
Receiver
(Side View)
To Next Page
Loading...
