9.45, 9.45i Treadmill
Page 37
Diagram 6.3 - Lift Motor Components (1Y Units)
10. Choose one:
If... Then... Otherwise...
You are replacing the Continue with the next Skip to Step 14
magnet step
Removing and Replacing the Magnet
11. Remove the set screw that secures the magnet to the magnet hub. Discard the magnet.
Note:
When you position the magnet in the magnet hub, place the north pole towards the center of the
magnet hub. The north pole of the magnet should be marked with a spot of white paint. If the
magnet on the treadmill you are servicing is not marked, use either a compass or another
magnet to determine the north pole.
12. Position a new magnet in the magnet hub.
13. Tighten the set screw that secures the magnet to the magnet hub.
Lift Motor
Rotation Sensor
Bracket
Magnet
Rotation Sensor
Hub
To Next Page
Loading...
