Product Owner’s Manual: Club Features 25
Displaying the Usage Log
USAGE LOG appears on the display and scrolls continuously.
14. When you are ready, press OK to view each program, the number
of times it has been used, and the associated cumulative minutes.
The usage log is helpful in determining user preferences in
program selection.
15. Use the ▼ arrow key, on the navigational bar, to select and view
usage information about a specific program.
16. To move to the next display (error log), press BACK and then
press the ▼ arrow key on the navigational bar.
Viewing or Erasing the Error Log
17. ERROR LOG appears on the display and scrolls continuously.
When you are ready, press OK to determine how many errors exist
in the error log.
Note: If NO ERRORS appears, press PAUSE/RESET to return
to the Precor banner, or press BACK to return to the ERROR
LOG banner.
18. Use the ▼ arrow key, on the navigational bar, to select and view
the first entry in the error log.
19. To move through the error log, continue to press the ▼ arrow key
on the navigational bar. Each error code specifies when it
occurred, listing the odometer, unit, hour meter, and current
(amps) values.
20. Copy the error code information to paper so you can provide it to
Customer Support if needed. Be sure to copy it exactly as shown.
21. When you no longer need the information in the error log, return to
the display that indicates the number of errors in the error log (for
example, 5 ERRORS).
22. Press QUICKSTART for at least four seconds to erase the error
log. Continue to maintain light pressure on the key until the
message, HOLD TO CLEAR ERRORS, scrolls off the display.
When the key is released, NO ERRORS appears on the display,
which indicates the error log has been deleted.
Important: You cannot retrieve the error log once you have
deleted it. You may want to resolve any issues you are
experiencing with the unit before erasing the error log.
23. When you are ready, press PAUSE/RESET to return to the Precor
banner.
To Next Page
Loading...
