Owner’s Manual: Important Safety Instructions 6
Electrical Recommendations: 120 V and 240 V
Elliptical Fitness Crosstrainers
Note: This is a recommendation only. NEC (National
Electric Code) guidelines or local region electric codes
must be followed.
CAUTION: Use the supplied and appropriate power
cord. Do not remove or otherwise bypass the 3-prong
plug with an adapter in order to use a non-grounded
outlet. Do not plug the EFX into a power transformer in
an attempt to adjust the voltage requirements. Failure
to follow these instructions might damage the unit and
will void the Precor Limited Warranty. If an appropriate
cord for your location was not included with your EFX,
please contact your Precor dealer for the proper Precor
power cord. For more information on authorized
Precor dealers in your area, please contact Customer
Support at www.Precor.com.
You should have received a power cable that meets your
local electrical code requirements along with the
equipment. Elliptical Fitness Crosstrainers may be
connected to branch circuits with other devices within the
circuit limits. If you need additional help with the power
connections contact your Precor authorized dealer.
To Next Page
Loading...
