Owner’s Manual: Workout Options 27
Cooling Down After a Workout
Incorporate a cool-down period into your workout to help
lower your heart rate and minimize muscle stiffness or
soreness.
Note: You cannot switch to a different program or change
display options during the cool-down period.
When you complete a program with a time limit, you
automatically enter a cool-down period. The resistance is
reduced by 20%. To readjust the CrossRamp or
resistance, press the arrow keys. To lower your heart rate,
reduce your strides per minute.
A workout summary appears at the end of the cool-down
period. Refer to Ending a Workout.
Important: If you exit a program before completing it, the
cool-down period is bypassed.
To prematurely end the cool-down period, do the following:
1. Grasp a stationary handrail with one hand.
2. Press RESET to view the workout summary.
3. Press RESET again to return to the Precor banner.
Important: Hold on to a stationary handrail. Step off the
EFX when the lift has stopped moving.
Pausing During a Workout or the
Cool-Down Period
Stop pedaling to pause anytime during a workout or during
a cool-down period. The pause mode has a default time
limit of 10 minutes. If you do not resume exercising during
that time, the display returns to the banner.
1. To pause, stop pedaling.
The center display indicates the amount of time
remaining in pause mode.
2. To resume exercising from pause mode, begin
pedaling.
To Next Page
Loading...
Need help?
General
