Adjustment Procedures
Adjustment procedures provide you with the step-by-step adjustment instructions to bring
systems and components into specification. Perform the adjustment procedures whenever
a trouble symptom points to a particular component and after a major component is
removed/replaced.
Available Adjustment Procedures
"Drive Belt Tension and Alignment Adjustment" on the facing page
"Running Belt Tension and Tracking Adjustment" on page 62
"Lift Motor Calibration" on page 69
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 56
5 Adjustment Procedures
Available Adjustment Procedures
To Next Page
Loading...
