Trim Landing Covers Replacement
Trim Landing Covers Replacement
ID Description
Trim Landing Cover- left
Trim Landing Cover - right
Removal Instructions
The same procedure applies to both the left and right trim landing covers.
1. Remove the hood cover, see "Hood Cover Replacement" on page 82.
2. Remove the trim landing cover #3 Phillips screw, washer, and bushing fastener hard-
ware. Retain part(s) and/or fastener(s) for installation.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 85
6 Replacement Procedures
Covers and Panels Replacement
To Next Page
Loading...
