FTS Glide Assembly and Maintenance Guide
page 9
1 2 3 4 5 6
C. Lift and stabilize the two Main Uprights. Have an
assistant hold the Main Uprights steady while you
align the Upper and Lower Cross Braces and secure
them using
four 2⁵⁄₈-inch hex head bolts
eight washers
four locknuts
Use your fingers to thread the bolts while adjusting
the alignment of the Main Uprights. To allow for
adjustments, loosely secure the fasteners. Make
sure the assembly is stable and balanced before
your assistant lets go of the Main Uprights.
Main Uprights
2 - 2⁵⁄₈" bolts
4 - washers
2 - locknuts
C
Lower Cross Brace
Upper Cross Brace
Step 1. Assemble Main Structure, continued
2 - 2⁵⁄₈" bolts
4 - washers
2 - locknuts
C
To Next Page
Loading...