EasyManua.ls Logo

Precor Move Beyond EFX556 NAVY - Page 28

Precor Move Beyond EFX556 NAVY
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
page 28
COMMERCIAL PRODUCTS DIVISION
Numeric Keys (0 through 9): During a workout, you can use the numeric keys to
change the EFX’s resistance (from 1 to 20). Remember, if you use the numeric keys
to change the resistance, you need to designate, within three seconds, whether you
are
increasing
the resistance by pressing the key or
decreasing
the resistance by
pressing the key.
Note: When you use the numeric keys to change the resistance, the actual
resistance appears on the display as the brake is applied. If you wish to halt the
change, press either the Resistance or key. The brake stops applying
resistance and the display shows the current resistance level.
During the Setup prompts, you can also use the numeric keys to type in a course
number (1 through 6), workout time, weight, and age. Note that you must press
Enter to process your selection.
CHANGE: During a workout, the Change key lets you choose which feature ap-
pears on the display.
RESET: While you are answering the Setup prompts or when you are working out,
you can cancel the course program, clear the display, and return to the banner by
pressing Reset.
RESISTANCE
▼▲▼▲
▼▲▼▲
▼▲: During a workout, the Resistance ▼▲ keys let you decrease
or increase the force applied against your stride. The display can show a range
from 1 to 20. Setting 1 provides the least resistance.
When you change the resistance by pressing the Resistance or key, the
number that appears on the display shows the
target
resistance (not necessarily, the
present resistance being applied) because the display can change much faster than
the brake.
Another feature of the Resistance ▼▲ keys lets you review the EFX’s
resistance any time during your workout. If RESISTANCE is not one of the
chosen features being displayed, you can view the actual resistance by lightly
touching either Resistance or
key. You can opt to change the resistance if
you hold the key down or touch the key again within two seconds.
Note: The numeric keys can also be used to adjust the resistance. Please refer to
Numeric Keys
above.
ENTER: Workout specific prompts need to be answered and “entered” into memory.
Pressing Enter selects the information displayed and processes it.

Table of Contents

Related product manuals