page 31
COMMERCIAL PRODUCTS DIVISION
Setup prompts appear in the center display prior to your workout. You address
each prompt using the keypad keys.
Keypad use during
Setup Prompts Description
▼ or ▲ Scrolls through the selections. The longer the key is
held down, the faster the selections scroll past.
Reset Exits the Setup Mode and returns the display to
the Precor banner.
QuickStart Bypasses any remaining Setup prompts and
accesses the course selection. Refer to
Using
QuickStart During the Setup Prompts
on the
next page.
Enter Submits the displayed selection and moves onto the
next Setup prompt.
COURSE prompt: The EFX provides 5 course selections. The first course selec-
tion to appear on the display is MANL (Manual course). Use any ▼▲ key to
change the selection. Press Enter to accept the displayed name. Have the user
refer to the display label on the console to determine which abbreviations repre-
sent the different course selections. For a description of the courses, refer to
page 37.
Important: If you press QuickStart while a course selection is displayed, the
course begins. Refer to
Using QUICKSTART during the Setup Prompts
.
Note: If no key press is detected for ten seconds, the display prompts the user on
what to do next. If no key press is detected for two minutes or the RESET key is
pressed, the display returns to the banner.
Workout Time prompt: A default value of 30 minutes (or the custom settings
limit, whichever is less) appears. Use any ▼▲ key to change the workout time.
For MANL, XTR, and INTV courses, the workout time may be set as low as one
minute or as high as the custom settings limit. Press Enter or QuickStart to
accept the displayed value.
To Next Page
Loading...
